Have you ever seen the error code 0xc0000034 on your computer screen and wondered what it meant? Well, you’re not alone. This error code is fairly common and can be caused by a variety of things. In this article, we’ll discuss what the error code 0xc0000034 means, what causes it, and how to fix it.
Table of Contents
What is error code 0xc0000034
If you’ve seen the error code 0xc0000034 on your computer, you might be wondering what it means. This error is usually caused by a corrupted or missing file, and it can be frustrating to see it pop up when you’re trying to use your computer.
Error code 0xc0000034 can be caused by a variety of things, but most often it’s caused by a missing or corrupt file. If you’re seeing this error, it’s likely because something has happened to the file that Windows needs to boot your computer. This file is called the Boot Configuration Data file, and it’s responsible for telling Windows how to boot your computer.
If the Boot Configuration Data file is missing or corrupt, you’ll see the error code 0xc0000034. This error can be fixed, but it’s not always easy. Depending on what’s causing the problem, you might need to use a special tool to fix it, or you might need to reinstall Windows altogether.
If you’re seeing the error code 0xc0000034, don’t despair. There are ways to fix this problem, and you can get your computer up and running again in no time.
What causes error code 0xc0000034
If you’re seeing the 0xc0000034 error, it means that Windows was unable to access important files on your computer. This can be caused by a number of things, including malware infections, corrupted system files, or hardware issues.
In most cases, you’ll be able to fix the 0xc0000034 error by using a Windows installation disc or USB drive to repair your computer. However, if your computer’s boot files have been damaged, you’ll need to use a different method to fix the error.
Here’s a closer look at the 0xc0000034 error and how you can fix it.
What Is the 0xc0000034 Error?
The 0xc0000034 error is a type of blue screen error that indicates that Windows was unable to access important files on your computer. These files are typically stored in the C:WindowsSystem32 folder and include critical system files like hal.dll, ntoskrnl.exe, and winload.exe.
When these files are damaged or missing, Windows will be unable to load, which will cause the 0xc0000034 error to appear.
In most cases, the 0xc0000034 error will appear when you try to boot up your computer after a power outage or other type of restart. However, it’s also possible to see this error if your computer’s hard drive is failing or if there’s an issue with your computer’s BIOS.
How to Fix the 0xc0000034 Error
There are a few different ways that you can fix the 0xc0000034 error, but the most common method is to use a Windows installation disc or USB drive.
If you have a Windows installation disc or USB drive handy, insert it into your computer and then restart your machine. When you see the “Press any key to boot from CD or DVD” message, press any key on your keyboard to continue.
Once you’re at the “Choose an option” screen, select “Troubleshoot.” Next, choose “Advanced options” and then select “Command Prompt.”
At the command prompt, type in the following commands and press Enter after each one:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
These commands will scan your computer for errors and then attempt to repair them. Once they’re finished, reboot your machine and see if the 0xc0000034 error has been fixed.
How can I fix error code 0xc0000034
If you’re seeing error code 0xc0000034 on your computer, it might be due to a corrupted file or a failed hard drive. Here are some troubleshooting steps that can help you fix the issue.
First, try restarting your computer. This might sound like a no-brainer, but sometimes a simple restart can fix issues with your computer that you thought were irreparable.
If a restart doesn’t work, the next step is to check for any corrupted files on your computer. To do this, you can use the Windows File Checker tool. To run the Windows File Checker tool, follow these steps:
1. Press the Windows key + X to open the Power User menu.
2. Click Command Prompt (Admin).
3. In the Command Prompt window, type the following command and press Enter: sfc /scannow
This command will scan all of the files on your computer and replace any that are corrupt.
If you’re still seeing the 0xc0000034 error after running the Windows File Checker tool, it’s possible that the issue is with your hard drive. To check if your hard drive is failing, you can use the chkdsk tool. To run chkdsk, follow these steps:
1. Press the Windows key + X to open the Power User menu.
2. Click Command Prompt (Admin).
3. In the Command Prompt window, type the following command and press Enter: chkdsk C: /f /r /x
Replace C: with the letter of the drive that you want to scan. This command will scan your hard drive for errors and attempt to fix them.
If you’re still seeing the 0xc0000034 error after running chkdsk, it’s likely that your hard drive is failing and will need to be replaced.
What are the symptoms of error code 0xc0000034
If you’re seeing the 0xc0000034 error code, it typically indicates that your computer’s BIOS is outdated. This can happen if you’ve upgraded your operating system recently, as older BIOS versions may not be compatible with the new OS.
In most cases, you’ll see the 0xc0000034 error when you try to boot up your computer. It may also appear if you’re trying to install a new program or driver.
The easiest way to fix the 0xc0000034 error is to update your computer’s BIOS. You can usually do this through your computer’s manufacturer website.
If you’re not comfortable updating your BIOS, you can also try using a bootable USB drive with the new BIOS version. This can be tricky, so if you’re not sure how to do it, you may want to ask for help from a friend or IT professional.
Once you’ve updated your BIOS, restart your computer and see if the 0xc0000034 error appears again. If it does, there may be another issue causing it, such as a corrupt file on your hard drive. In this case, you’ll need to troubleshoot the other issue before you can use your computer normally again.
How does error code 0xc0000034 affect my computer
Assuming you would like an article discussing the Error Code 0xc0000034:
When your computer displays the error code 0xc0000034, it is telling you that the Windows Boot Configuration Data file is missing or corrupt. This can be a serious problem, as it prevents your computer from starting up properly. In some cases, you may see this error after upgrading to a new version of Windows, or after making changes to your BIOS or UEFI settings.
There are a few things you can do to try and fix this problem. First, you can try using the Startup Repair tool to automatically fix any boot configuration issues. If that doesn’t work, you can try manually editing the BCD file to point to the correct location of your Windows installation. Finally, if all else fails, you can reinstall Windows from scratch.
Let’s take a look at each of these solutions in more detail.
Startup Repair
Startup Repair is a built-in tool in Windows that can help fix common problems that prevent your computer from starting up properly. To use Startup Repair, follow these steps:
1. Boot from your Windows installation disc or recovery drive.
2. Choose your language settings and then select “Repair your computer.”
3. On the “Choose an option” screen, select “Troubleshoot.”
4. On the “Troubleshoot” screen, select “Advanced options.”
5. On the “Advanced options” screen, select “Startup Repair.”
6. Windows will now scan for any startup problems and attempt to automatically fix them.
If Startup Repair is able to fix the problem, great! If not, don’t worry – we’ll try some other methods.
Manually Editing the BCD File
The next thing we can try is manually editing the Boot Configuration Data (BCD) file. This file tells Windows where to look for the files it needs to start up properly. If it’s pointing to the wrong location – or if it’s been corrupted – then you’ll see the 0xc0000034 error.
To edit the BCD file, you’ll need to use the Command Prompt – which we’ll discuss how to do in a moment. But first, let’s create a backup of your existing BCD file in case something goes wrong. That way, you can always restore it and start over. To create a backup of your BCD file:
1. Boot from your Windows installation disc or recovery drive.
2. Choose your language settings and then select “Repair your computer.”
3. On the “Choose an option” screen, select “Command Prompt.”
4. In the Command Prompt window, type these commands:
bcdedit /export C:bcdbackup
ren C:bootbcd bcd.old
bootrec /RebuildBcd
These commands will export (back up) your current BCD file to C:bcdbackup, rename your existing Bcd file to bcd.old, and create a new one using information found in the Boot Sector and Boot Configuration Data (BCD).
5. Once the process is complete, type exit and press Enter to close the Command Prompt window and reboot your computer normally.
If everything went well, your computer should now boot up without any problems! If not – or if you didn’t feel comfortable doing this on your own – don’t worry; we still have one more method to try before giving up and reinstalling Windows.
Reinstalling Windows
If neither Startup Repair nor manual BCD editing worked for you, then unfortunately your only remaining option is to reinstall Windows from scratch. Before you do that, however, make sure that you’ve backed up all of your important files! Once you’ve done that:
1. Boot
Is there anything I can do to prevent error code 0xc0000034
This is a common error that can occur for a number of reasons. First, let’s take a look at what the error code means. 0xc0000034 is a Windows NT STATUS Code. This particular code means that there is a problem with the boot sector of your hard drive. The boot sector is the part of your hard drive that stores information about how to start up your computer. If this sector is damaged or corrupted, it can cause your computer to display this error message.
There are a few things that you can do to try and fix this error. First, you can try restarting your computer. Sometimes, simply restarting your computer can fix this problem. If that doesn’t work, you can try using the Windows Recovery Console to fix the boot sector. To do this, you’ll need to have your Windows installation disc handy. If you don’t have your disc, you can usually download one from the Microsoft website.
Once you have your Windows installation disc, insert it into your computer and restart it. When prompted, choose to boot from the CD. Once the CD has loaded, you’ll be presented with a menu. Choose the option to Repair your computer. This will launch the Windows Recovery Console.
Once the Recovery Console has launched, type in the following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
These commands will attempt to fix the boot sector on your hard drive. Once they’ve finished running, reboot your computer and see if the error is fixed. If not, you can try using some other tools included in the Recovery Console to try and fix the problem.
If you still can’t fix the problem, you may need to replace your hard drive. This is usually only necessary if the damage to the boot sector is severe. If you’re not comfortable replacing your hard drive yourself, you can take it to a computer repair shop and they should be able to do it for you.
What should I do if I encounter error code 0xc0000034
If you’re seeing error code 0xc0000034 on your Windows 10 computer, that means the Boot Configuration Data (BCD) store is missing or corrupt. This can happen for a number of reasons, but thankfully, it’s usually easy to fix.
Here are four methods you can use to repair the BCD store and get your PC up and running again.
Method 1: Use the Windows 10 Installation Media
If you have a Windows 10 installation disc or drive lying around, you can use it to repair the BCD store. To do so, just boot from the media and select the “Repair your computer” option.
Once the recovery options appear, click on “Troubleshoot” and then “Advanced options”. Finally, select “Command Prompt” to open a command prompt window.
At the command prompt, type in the following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
After running all of these commands, restart your computer and see if the issue has been resolved. If not, move on to Method 2.
Method 2: Use the Windows Recovery Environment
If you don’t have a Windows 10 installation disc or drive, you can still use the Windows Recovery Environment to repair the BCD store. To do so, just boot your computer and wait for the “Please select an option” screen to appear.
On this screen, select “Troubleshoot” and then “Advanced options”. Finally, click on “Command Prompt” to open a command prompt window.
At the command prompt, type in the following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
exit
After running all of these commands, restart your computer and see if the issue has been resolved. If not, move on to Method 3.
Method 3: Use Easy Recovery Essentials
Easy Recovery Essentials is a bootable repair tool that can be used to automatically fix errors like 0xc0000034. To use it, just download and burn the ISO file to a blank CD or USB drive.
Once you have the Easy Recovery Essentials CD or USB drive, just boot from it and select the “Automated Repair” option. Easy Recovery Essentials will now scan your computer for errors and attempt to fix them automatically.
Once it’s done, restart your computer and see if the issue has been resolved. If not, move on to Method 4.
Method 4: Re-create the BCD Store
If none of the previous methods have worked, you can try re-creating the BCD store from scratch. To do so, just open a command prompt window and type in the following commands:
bcdedit /export C:BCD_Backup
c:
attrib c:bootbcd -h -r -s
ren c:bootbcd bcd.old
bootrec /RebuildBcd
After running these commands, restart your computer and see if the issue has been resolved.
If you’re still seeing error code 0xc0000034, it’s likely that there’s something wrong with your hardware. In this case, you’ll need to take your computer to a qualified technician for further diagnosis and repairs.
Can error code 0xc0000034 be fixed
The 0xc0000034 error code is a common error that occurs on Windows-based computers. There are a number of ways to fix this error, but the most effective way is to use a dedicated software tool.
Error code 0xc0000034 can be fixed by using a dedicated software tool such as PC Fixer Pro. This software is designed to fix a variety of Windows errors, including the 0xc0000034 error code. PC Fixer Pro will scan your computer for any issues and then provide you with a list of recommended actions to take.
Once you have run PC Fixer Pro, restart your computer and the 0xc0000034 error should be fixed. If the error persists, you may need to contact Microsoft support for further assistance.
How long does it take to fix error code 0xc0000034
If you’re seeing error code 0xc0000034 on your computer, it means that Windows cannot access the system partition because of an invalid BOOT configuration. This could happen for a number of reasons, but most often it’s because the boot files are corrupt or missing.
Fortunately, this is usually a easy problem to fix. In this article, we’ll show you how to troubleshoot and fix error code 0xc0000034 in Windows 10.
First, let’s take a look at what causes this error. Then we’ll go over some troubleshooting steps that can help you fix it.
What Causes Error Code 0xc0000034?
There are a few different things that can cause error code 0xc0000034:
The BOOT Configuration Data (BCD) is missing or corrupt.
The Master Boot Record (MBR) is corrupt.
The Boot Sector is corrupt.
The System Reserved Partition is missing.
These are all problems that can prevent Windows from being able to access the system partition. As a result, you’ll see the error code 0xc0000034 when you try to boot up your computer.
How to Fix Error Code 0xc0000034?
Now that we know what causes this error, let’s take a look at how to fix it. There are a few different methods you can try, but we’ll start with the easiest one first.
Method 1: Use Automatic Repair
Windows 10 comes with a built-in tool called Automatic Repair that can automatically fix common problems that can prevent Windows from booting properly. This includes problems with the BCD, MBR, and Boot Sector.
To use Automatic Repair, just follow these steps:
1. Insert the Windows 10 installation media and boot from it. If you don’t have an installation disc, you can create one using another computer running Windows 10.
2. On the “Choose an option” screen, select “Troubleshoot”.
3. On the next screen, select “Advanced options”.
4. On the next screen, select “Startup Repair”.
5. Wait for Startup Repair to scan your computer for problems and attempt to fix them automatically.
6. If Startup Repair was able to fix the problem, you should be able to boot into Windows normally now. If not, continue to the next method below.
What are the consequences of having error code 0xc0000034
If you receive the 0xc0000034 error code, it typically means that your computer’s BIOS is corrupt or missing. This can happen for a variety of reasons, including a power outage, a virus, or simply because your BIOS was not configured correctly. If you receive this error code, you will need to take action to fix it.
The consequences of having error code 0xc0000034 can be serious. If your BIOS is corrupt or missing, your computer will not be able to start up. This means that you will not be able to use your computer at all. In addition, if your BIOS is corrupt or missing, your computer may be vulnerable to security threats.
There are a few things you can do to try to fix the 0xc0000034 error code. First, you can try to update your BIOS. This may resolve the issue and allow your computer to start up again. If this does not work, you can try to reset your BIOS. This will restore the default settings for your BIOS and may allow your computer to start up again. Finally, if neither of these options work, you will need to replace your BIOS chip.
Replacing your BIOS chip is a relatively simple process, but it is important to note that it should only be done by a qualified technician. If you attempt to replace your BIOS chip yourself, you could damage your computer beyond repair.
The consequences of having error code 0xc0000034 can be serious, but there are a few things you can do to try to fix the issue. First, try updating your BIOS. If this does not work, try resetting your BIOS. Finally, if neither of these options work, you will need to replace your BIOS chip.